manuals/manuals_Support_Center_Ion_20Megatouch_20Wallette_20__20Entertainer_Power_20Supply

Troubleshooting Information - Removal/Installation of Major Assemblies -

Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer

Megatouch Ion Technical Reference Manual

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES

Removal/Installation of Major Assemblies -

Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer

Power Supply Removal

1. Turn off and unplug the game.

2. Unlock and open the CPU section.

3. Unplug the IEC connector from the power supply. See Figure 1.

IEC CONNECTOR

POWER
SUPPLY

HARD
DRIVE

FIGURE 2 - POWER SUPPLY MOUNTING SCREWS (2 PLACES)

4. Disconnect the wire connector nearest to the power supply.

5. Remove the 2 screws fastening the power supply and mounting bracket to the game (Figure 2).

6. Remove the power supply.

FIGURE 1 - OVERVIEW OF HARD DRIVE

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES

Removal/Installation of Major Assemblies -

Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer (cont’d)

Power Supply Installation

1. Install the new power supply and bracket in the game and fasten them with the 2 screws that were

used to fasten the old power supply and bracket. See Figure 2.

2. Connect the power supply wire connection.

3. Reconnect the IEC connector to the power supply. See Figure 1.

4. Close and lock the CPU section.

5. Plug in and turn on the game.

Troubleshooting Information - Removal/Installation of Major Assemblies -

Ion eVo/eVo Wallette/Elite Edge/Megatouch Entertainer

Megatouch Ion Technical Reference Manual